Seen from the outside, copper cable recycling looks simple: you granulate, separate the copper from the plastic and sell the granulate. Anyone who does it every day knows it isn’t that simple.
Purity and yield depend less on the individual machine and more on how the plant responds to the material coming in. And the material coming in changes every day. In copper cable recycling, granulate quality is decided by the physics of the material.
1. Copper cable recycling: a cable is not a material, it is an assembly
Every cable combines a conductor, one or more insulating layers and often shields, armour or fillers. Each of these elements behaves differently in the granulator and on the table.
The conductor
- Solid single wire. Liberates easily and gives a heavy, regular granulate.
- Stranded and flexible. The fine wires bend instead of being cut, form “hairs” and tend to stay trapped in the plastic.
- Capillary (data, telecom and automotive cables). The granulate is extremely light and density separation becomes delicate.
- Tinned or silver-plated. Changes the commercial grade of the granulate, and therefore how the stream needs to be managed.
The insulation
| Insulation | Indicative density (g/cm³) | Typical behaviour in the process |
|---|---|---|
| PE / XLPE | 0.92 – 0.96 | Light, clear density contrast; XLPE is tough and needs a clean cut |
| Rubbers (EPR, silicone) | 1.1 – 1.5 | Elastic: they deform instead of being cut and wear the blades |
| PVC | 1.3 – 1.5 | The most common case; plasticisers and fines must be kept under control |
| LSZH / HFFR | 1.4 – 1.6 | Abrasive mineral fillers and a lot of dust |
| Fluoropolymers (FEP, PTFE) | 2.1 – 2.2 | Heavy for a plastic and strongly electrostatic |
Copper has a density of around 8.9 g/cm³. On paper, the contrast with any plastic is huge. But copper-plastic separation only works if every particle behaves as its density says it should: liberated, the right size and free to move. Copper hairs, fines that are too light and particles sticking to surfaces break this assumption.
2. A telling case: FEP cables
Take high-performance cables with FEP insulation, a fluoropolymer from the same family as Teflon. In granulation the copper comes out clean. The plastic, however, tends to stick to belts, vibrating tables and the screen, and in some places forms lumps.
Density was not the problem: FEP is still very far from copper. The problem was static electricity.
3. How the charge builds up: the triboelectric effect
When two different materials touch and then separate, some electrons pass from one to the other. It is the same phenomenon as a balloon rubbed on your hair that then sticks to the wall. The more the two materials differ in their ability to hold on to electrons, the more charge they exchange.
Materials can be lined up from the most “generous” to the most “greedy” for electrons: this is the triboelectric series. Fluoropolymers such as PTFE and FEP sit at the negative extreme, at the bottom of the ranking.
The reason is chemical. Their chain is wrapped in fluorine atoms, the most electronegative element in the periodic table. Every time an FEP flake rubs against the steel of the machine, other plastics or copper, it takes electrons and becomes negatively charged.
4. Why the charge doesn’t go away
Many plastics build up a charge too, but then it dissipates. Not FEP, for two reasons:
- It is an exceptional insulator. That is exactly why it is used in data cables and high-temperature cables. What makes it an excellent insulator also makes it a trap for charge: the electrons have no way to flow away.
- It does not absorb moisture. Normally, a very thin film of water on the surface of materials helps discharge static electricity. FEP is water-repellent, so that film does not form.
In a dry environment the effect gets even worse. In plants in arid regions, or in winter months with the heating on, the phenomenon can become noticeable even on materials that cause no problems elsewhere.
5. Why cable granulation amplifies the phenomenon
The recycling process creates ideal conditions for charging the material:
- A great deal of friction. Cutting in the granulator, pneumatic conveying, belts, vibration of the tables and screen: every step is a new contact-and-separation cycle, and the charge builds up.
- Small, light particles. Granulating the cable creates a huge surface area relative to weight. On a tiny flake, the electrostatic force becomes stronger than gravity.
So the material no longer falls where it should. It sticks to metal surfaces or clumps together. That is why the phenomenon shows up precisely on belts, vibrating tables and the screen.
6. Copper-plastic separation: why copper passes through without problems
Copper is an excellent conductor. Even if it picks up a charge, it immediately releases it to the machine, which is earthed.
That is why, even with these cables, copper is recovered well in separation. The problem is not the metal: it is only the fluorinated plastic.
7. Managing it is a matter of experience
FEP does exactly what it was chosen for: it insulates. It keeps doing so even after it has become a granulate to be separated, and no plant can change the chemistry of fluorine.
The phenomenon can be managed, but not with an off-the-shelf accessory. You have to understand where in the line the charge is generated, where it builds up and how it interacts with the site’s climate and the rest of the stream. These are assessments made on the real material and the real plant.
We know how to do it. It is experience that cannot be improvised.
8. Over 30 years of cable recycling
The FEP case is just one example. Every cable has its own physics: rigid or flexible, capillary or power, with standard or special insulation. Our job is to understand it before it turns into machine downtime or a downgraded granulate.
- Separation. We were among the first to introduce the turbo unit and the ZigZag separator in cable recycling plants. Under certain conditions, we design plants that do without the knife mill.
- Tailor-made plants. From the compact K750 granulator to industrial lines, every configuration starts from the material actually being processed.
- Real yields. In our technical data sheets we state capacities measured on real material, not on an ideal cable.
- European components and global service. Because a plant is only as good as its operational continuity.
Processing special cables or a mix that is hard to separate? Tell us about your material: we’ll discuss it with the data in hand.
9. Frequently asked questions about copper cable recycling
What determines the purity of copper granulate in cable recycling?
The type of incoming cable and how the plant handles it: conductor liberation, particle size and the behaviour of each particle during separation. Density alone is not enough.
Why are stranded and capillary cables harder to separate?
Because the fine wires bend instead of being cut and produce a light granulate that tends to stay trapped in the plastic.
Why do cables with FEP or PTFE insulation cause static electricity problems?
Fluoropolymers are among the materials that charge most through friction and, being excellent insulators and water-repellent, they cannot dissipate the charge.
Does electrostatic charge compromise copper recovery?
Normally not. Copper is a conductor and discharges through the earthed machine. The problem concerns the plastic fraction, which sticks to surfaces and forms lumps.
Do special cables need a different plant?
It depends on the material. It must be assessed case by case, on the real cable and with people who have experience of these streams.

























